† The District to review conditions, grant, plat, and description. Applicant to provide title report, title insurance, plat map, and legal description; and record easement, with a copy to the District.
1 per property or easement: $500
see note 1
† The District to review simple encroachment and documents. Applicant to provide title report with easement , encroachment description and plat. Applicant to record permit, with a copy to the District.
1 per encroachment: $500
see note 1
† Other sewer related conditions apply. Full plan check required.
1 per lot, if no sewer is involved: $500
1 per lot, onsite sewer laterals to offsite sewer: $500
Other sewer related conditions: $N/A - Full Plan Check
see note 1
$1,000
$1,000
$1,000
†† Any excess funds to be used for later plan check.
1 per subdivision up to 50 lots: $1,000
see note 2
1,000 feet or less of pipe: $2,000
1,001 to 2,000 feet of pipe: $3,000
2,001 to 3,000 feet of pipe: $4,000
3,001 to 4,000 feet of pipe: $5,000
4,001 to 5,000 feet of pipe: $6,000
5,001 to 7,000 feet of pipe: $7,000
7,001 feet of pipe and up: $1 per foot
Pump stations: 2.50% of preliminary bond estimate
see notes 2 & 3
Fee applies to development that includes extension of public sewer only.
Up to 1,000 feet of pipe $500 Fee applies to development that includes extension of public sewer only
Over 1,000 feet of pipe $500 plus $0.50 per foot
†† Fee includes administration and inspection.
Minimum deposit for short lines or lateral: $500
Trunk, sewer and appurtenances: 10% of approved bond estimate including Admin & Inspection
Pump stations: 10% of approved bond estimate including Admin & Inspection
see note 2
1 Minimum base fee. Additional fees may be required for complex projects for extended effort
2 LWD processing, review, checking, and inspection fees are all estimated and the amounts shown are the required minimum deposits. The District will track project specific costs and a refund will be given if deposits exceed expense, or additional deposits will be required if costs exceed deposits.
3 Initial plan check deposit is intended to cover cost of initial plan check and one resubmittal. The developer will be advised of budget remaining after each plan check. Additional deposits will be required, if necessary, prior to continuation of plan checking.